The pre-welded wire mesh can be used for reinforcement of the following:

  • Solid concrete slabs and hollow plates floors, ceilings and walls
  • Conduits and reservoirs
  • Motorways and aircraft runways
  • Columns, beams, joints and concrete pipes

 

Pre-welded wire mesh for use in fencing and protection:

  • Fencing for protection of storage areas, airport borders
  • Prevention of stone avalanches in mountainous areas

 

Economic and technical advantages

    Field labor savings

  • 50%-90% reduction in placing time and cost in construction projects according to actual evidence
  • Cut-down of reinforcing time (3times faster than rebars)

    Economies of Scale

  • Important saving of raw material and weight is achieved due to higher yield strength compared to hot-rolled rebars

    Simplicity

  • Work drawings and material lists are quickly prepared
  • Meshes are easy to select and order
  • Transport, identification, handing and fixing of meshes is simpler than rebars

    Quality Control

  • Right and correct spacing of steel rods are guaranteed.
  • Machines are operated under close supervision of trained staff, engineers, and the quality control unit.

Technical excellence

 ·        Automatic point-welding and intrinsic resistance against changes due to atmospheric factors makes mesh         superior in strength as compared to other construction material

 

    Variety

·        Pre-welded mesh is available in various diameters, length and widths of cross-sections 

    High Quality

·        The steel wire used in tic tac’s mesh is produced from hot-rolled wire rod of controlled quality.

·        It is drawn under special conditions to give increased tensile and yield strength.

 

 

Availability of tic tac’s Mash

  • Tic tac’s mesh is available in standard sizes or can be specially ordered, in accordance with international standards.
  • The meshes are manufactured in flat sheets, either with smooth or ribbed wire rod
  • Wire diameter is 6-11 mm
  • Maximum sheet dimensions are 2.40m in width and 5.0m in length
  • Cross-sections can be squares or rectangles in a multiple of 5mm e.g.10x10, 15x15, 15x20, 10x20mm

 Tic tac can deliver the mesh with the above specifications immediately and can also deliver special meshes with different diameter and cross-section dimensions, according to individual client needs.